OPT 1701

Red Wood Viscometer No 1 and No 2

Red wood viscometer apparatus is widely used in Petroleum laboratories, Industries, Oil Refineries Educational, Institutions for study of the RED WOOD VISCOSITY of petroleum Products. Two types of viscometer are available; No. I for liquid having redwood flow from 20 seconds up to 2000 seconds and No. II for liquids having flow time more than 200 seconds. The complete outfit comprises of stainless steel bath having drain plug with electrical heating arrangements (or gas heating arrangements), with tap, silver plated oil cup, precision stainless steel jet, ball valve, cover thermometer clip, stirrer and suitable stand with leveling screws. In electrically heated model the temperature is controlled by a energy regulator / solid state regulator. The Instrument is suitable to work on 220 V AC, 50Hz.
Also available with digital temperature controller and indicator.

OPT 1702

Multiple Red Wood Viscometer

It consists of three redwood No. 1 cups and two redwood No. 2 cups. Total five cups are installed in the bath. Stirring is done by F.H.P motor. Other details are same as redwood viscometer.

OPT 1703

Saybolt Viscometer Apparatus

It is used for finding out Saybolt viscosity of fuel oils and lubrication oils by Universal Jet and FUROL Jet methods. The apparatus consists of Brass Chromium Plated cup centrally placed in a water Bath. The bath has a lid which contains a water cooling tube, two handles with two stirrer blades, thermometer socket and a heater. The stirring of liquid is done by hand with turn table arrangement. Temperature is controlled by an energy regulator. The Instrument is suitable to work on 220 V AC, 50Hz.
Also available with digital temperature controller and indicator.

OPT 1704

Tar Viscometer Apparatus

Used for determination the Viscosity of Bitumen, road emulsions, road oils, cut back Bitumen & fuel oils. It consists oil cup with JET, water bath, Stirring device, Thermometer clip, wooden Valve to fit Jet. The instrument is supplied with either 10 mm diameter orifice cup or 4 mm orifice diameter as customer desired. Fitted with energy Regulator control. Suitable to operate on 220 VAC
Also available with digital temperature controller and indicator.

OPT 1705

Pensky Marten Flash Point Apparatus

For determination of closed Flash Point of Fuel Oils, Lubricating Oils having a flash point above 49°C (120°F). The apparatus consists of a brass test cup with handle removable cup cover with spring operated rotating shutter having pilot jet, stirrer with flexible shaft. The complete assembly rests in an air bath which is covered with dome shaped metal top. The cup is fitted with insulated handle and locking arrangement near cup flange. The whole arrangement rests on a round shaped heater body with temperature regulator. The Instrument is suitable to work on 220 V AC, 50Hz.
Also available with digital temperature controller and indicator.

OPT 1706

Abels Flash Point Apparatus

For determination of (close cup) Flash Point of petroleum products & mixtures above 19° C and below 70°C. The apparatus consists of Brass/ Gun metal machined Cup Cover fitted with shutter mechanism, test flame arrangement (oil test jet / gas test jet), stirrer & thermometer Socket. The assembly rests in double Jacketed Copper/SS water bath. A funnel, an overflow pipe and split thermometer socket are fitted on top of the heating bath. The outer jacket of Bath is fitted with a stand. An electric heater with energy control is provided at the bottom with flexible cord.
Also available with digital temperature controller and indicator.

OPT 1707

Cleaveland Flash And Fire Point Apparatus

For determination of (OPEN CUP) flash & fire points of petroleum and other liquids except fuel oils and those materials having an open cup flash below 79° C (175° F). The apparatus consists of a machined brass oil cup with handle. This rests on a heating plate which is covered with insulated board to prevent heat loss. There is a thermometer clip and test flame arrangement with swivel joint for passing over liquid in the prescribed manner. Electrically operated heater is provided with temperature regulating device. Suitable to work on 220 V AC, 50 HZ mains.

OPT 1708

Penetrometer Apparatus

Penetration is a measure of consistency to determine the plasticity of substances. It is measured by the distance a standard cone or needle will penetrate the surface by a free fall of a standard temperature. Penetration Apparatus is used in production for controlling the consistency of solid, Plastic, Semi-Solid & Viscous materials. Petroleum & Petro-Chemical, Plastics, food, paper, confectionery, cosmetics, Rubber & many other Industries have application for Penetrometer Apparatus. It is used for penetration test on a wide variety of materials such as grease, petroleum, bitumen, tar, wax, polish, food stuff, rubber, asphalts and pharmaceutical creams.
This apparatus consists of a head support mounted on a vertical rod which can be adjusted for height. A rack & pinion & pointer assembly provides fine adjustment of cone or needle tip to sample & incorporates a slipping clutch mechanism which makes reading of Penetration & subsequent resetting a simple & accurate operation. The dial is graduated from 0-400 in one tenth millimeter subdivision. The Instrument is supplied with weights & sample containers.

OPT 1709

Distillation Apparatus

This apparatus is used for determinations of distillation characteristics of motor gasoline, aviation turbine fuels, Special boiling point spirits, Kerosene, naphthas, gas oils, distillate fuel oils and similar petroleum products. The instrument Consist the metal Shield to support metal flask with geared height adjustable device. The flask vertical height can be adjusted by Gear System and a knob. A glass window is provided on front side for viewing distillation flask. The shield is arranged to allow use of condenser bath. The bath is constructed of stainless Steel Sheet with MS black painted stand. An electric heater with an energy regulator is provided. The unit is supplied with 3 Nos. Asbestos boards of 38 mm, 50 mm & 70 mm diameter holes.

OPT 1710

Cloud And Pour Point Apparatus

The apparatus consists of main cooling bath (made of SS), stand unit with drain plug & cover with provision for fitting thermometer & for adding freezing mixture. A glass jar for holding oil is provided with metallic Jar. The instrument is supplied with insulated body. These are available in three sizes:- Single Test, Four Test, Six Test Model with insulated outer body.
The refrigeration Model also available to test the oil sample up to -30° C range.

OPT 1711

Kinematic Viscometer Bath

This viscometer bath is used to maintain the correct constant temperature for estimating kinematic viscosity of oils and petroleum products. The tank is made out of high grade SS. This tank is fitted with toughned Glasses in the front & rear sides to give a clear view of specimens kept inside. Temperature is controlled by precision contact thermometer or Digital electronic temperature controller from 5°C above room temp. up to 99°C with an accuracy of ± 0.1°C. All controls are provided on front side panel for easy operation. A FHP motor driven stirrer provided for circulation of water in the bath. Suitable to operate on 220 V A, 50 Hz mains. Available in following two chamber sizes:
1) 12"x9"x12" (can accomodate 4 viscometers)
2) 12"x12"x12"(can accomodate 6 viscometers)

OPT 1712

Conradson Carbon Residue Apparatus

It is used to determine the amount of carbon residue when an oil is evaporated under specified conditions. The carbon residue values of crude oil, residue etc. are useful in the manufacture of various lubricants. The apparatus consists of spun sheet iron crucible of 25cc capacity, sheet iron hood and sheet iron block on a stand with triangular wire and gas burner. Available in single test and four test models.

OPT 1713

Copper Strip Corrosion Test Apparatus

Used for detecting the presence of corrosive sulphur in petroleum products.The apparatus consists of a bath either dual purpose (50°C & 100°C) or a boiling bath (100°C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accomodated in each type of bath. Provided with energy regulator. Suitable to operate on 220 volts AC. mains.
Also available with digital temperature controller and indicator.

OPT 1714

Reid Vapour Pressure Test Apparatus

Used to determine the vapour pressure of volatile non-viscous Petroleum products except liquefied petroleum gases. The Vapour pressure bomb is made up of brass heavily Chromium plated and consists of an air chamber and a gasoline chamber of definite dimensions and volume ratio. A pressure gauge of required range is fitted above the air chamber. The joints are made leak proof by neoprene washers. The water bath used is of such dimensions that the vapour pressure bombs may be immersed to at least 1 inch above the air chamber and maintained at a constant temperature range upto 100°C ±2°C. Provided with FHP stirrer. Available in single test, two test, four test and six test models. Bomb optional.

OPT 1715

Rams Bottom Carbon Residue Apparatus

It is used to determine the amount of Carbon deposit when an oil is evaporated under specified condition. The apparatus consists of a solid metal bath having 6 wells to accommodate cocking bulbs with heating elements around the bath. The temperature can be controlled by an energy regulator. 6 cocking bulbs are supplied with apparatus.
Also available with digital temperature controller and indicator.

OPT 1716

Engler Viscometer Apparatus

Used for determining the Viscosity of lubricating and fuel oils in accordance with continental emulsions. It consists of Stainless steel water bath having oil cup with double walled lid. The water bath has a stirring device mounted on stand. A thermometer clip is fixed to the water bath and the oil cup lid has a thermometer socket. The bath is fitted with 500 watts heater. Temperature can be varied using the energy regulator. It is supplied with wooden or ebonite valve to fit the jet. It runs on 220 Volts AC, 50Hz mains. Glass accessories not included.
Also available with digital temperature controller and indicator.

OPT 1717

Softening Point Apparatus (Ring & Ball Apparatus)

This apparatus is meant for determination of softening point of Bituminous materials according to IP 58 and IS 1205-1958. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of glass beaker, ring stand, two steel balls with ring and ball guides. Available with an electric motorized stirrer, an electric heater with temperature regulator.

OPT 1718

Drop Point Apparatus

This is used for determining drop point of greases as per IP 31,132 & ASTM-D-566. It is an indication of the critical temperature of the solid or semi solid to the liquid state. The apparatus consists of brass sleeve and case with metal cup and a glass boiling tube with cork fitted to a bath (Beaker) is provided. A stirrer is also provided in the bath. It is provided with FHP Motorized stirrer and electrical heater with energy regulator control.

OPT 1719

Bomb Calorimeter

It is used for determination of heat of combustion, calorific value and sulphur contents of solid and liquid fuels. Complete set is provided with one SS bomb of 300 cc capacity, one SS crucible, jacket, calorimeter vessel, motorized stirrer, firing unit, briquette press, pressure gauge with copper pipe connection and digital thermometer 0.01°C Div. and operation manual.

OPT 1720

Melting Point Apparatus

This Apparatus determines the melting point of variety of products. It consists an aluminium block accepting 3 capillaries & a thermometer. It has a built in electric heating element. The temperature is controlled by energy regulator. Maximum temperature can be 350°C. An adjustable lens is provided for viewing exact melting point.
Also available with digital temperature indicator.